EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Prah iz nerjavečega jekla 17-4PH za 3D-tiskanje
17-4PH is a versatile, precipitation-hardening stainless steel alloy known for its remarkable combination of strength, general corrosion resistance, and mechanical properties at high temperatures up to 315 °C. Engineered for additive manufacturing and powder metallurgy, 17-4PH powder offers ease of use and consistent performance across a wide range of industrial applications, including aerospace, medical devices, and consumer goods.
Opis
17-4PH is a versatile, precipitation-hardening stainless steel alloy known for its remarkable combination of strength, general corrosion resistance, and mechanical properties at high temperatures up to 315 °C. Engineered for additive manufacturing and powder metallurgy, 17-4PH powder offers ease of use and consistent performance across a wide range of industrial applications, including aerospace, medical devices, and consumer goods.
Splošne informacije
| Kraj rojstva: | Changsha, Kitajska |
| Znamka: | PRAH |
| Točka: | 17-4 PH |
| Velikost delcev: | 15–53 μm/ 15–45 μm |
| certificiranje: | ISO9001, ISO14001 |
| Minimalno naročilo: | 20kg |
| Embalaža Podrobnosti: | Železni sod |
| Dobavni rok: | 7-10 dni |
Aplikacije
● Aerospace
● Automotive Industry
● Medical Implants and Devices
● Industrial Tools and Molds
● Precision Engineering
● Strojništvo in inženirstvo
● Customization
Tehnični podatki
Kemična sestava:
| Zlitina | Cr | Ni | Cu | Si | Mn | Nb | C | Fe |
| 17-4 PH | 15.5-17.5 | 3.00-5.00 | 3.00-5.00 | ≤1.00 | ≤1.00 | 0.15-0.45 | ≤0.07 | Bal |
Opomba: Drugi praški za 3D-tiskanje so na voljo po meri.
Velikost delca:
| velikost delcev | Občutljivost na dotik | Pretočnost | Porazdelitev velikosti delcev | ||
| D10 | D50 | D90 | |||
| 15-45μm | ≥4.5 | ≤20 | 15-22 | 26-35 | 46-55 |
| 15-53μm | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Note: Other 3D printing powders are available upon any customize requirements
Lastnosti dela:
| Gostota delov (g/cm³) | ≥7.9 | |
| Natisnjeno (xy) | Heat-treated(xy ) | |
| Natezna trdnost (MPa) | ≥980 | ≥1200 |
| Izkoristek (MPa) | ≥500 | ≥950 |
| Raztezek A10 (%) | ≥38 | ≥10 |
| Trdota HV/HRC | ≥245 HV | ≥32 HRC |
Značilnosti prahu
● Visoka sferičnost in visoka pretočnost
● Low oxygen content
● Plinska atomizacija z dušikom
paket
Za 3D-tiskanje: vsak PE paket + 20 kg pločevinke ali 25 kg/50 kg železni sod ali 250 kg železni sod.
