EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Inconel625 prah na osnovi niklja za 3D-tiskanje
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Opis
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Splošne informacije
| Kraj rojstva: | Changsha, Kitajska |
| Znamka: | PRAH |
| Točka: | Inconel625 |
| Velikost delcev: | 15-53μm |
| certificiranje: | ISO9001, ISO14001 |
| Minimalno naročilo: | 20kg |
| Embalaža Podrobnosti: | Železni sod |
| Dobavni rok: | 7-10 dni |
Aplikacije
● Petrokemija
● Marine Engineering
● Avtomobilizem
● Aerospace
● Proizvodnja medicinskih pripomočkov
Tehnični podatki
GH3625(Inconel625):
| Postavka | C | Si | Mn | Ni | Cr | Co | Mo | Al | Ti | Cu | Nb | P | S |
| GH3625 | ≤0.1 | ≤0.5 | ≤0.5 | Bal | 20.0-23.0 | ≤1.0 | 8.0-10.0 | ≤0.4 | ≤0.4 | ≤0.07 | 3.15-4.15 | ≤0.015 | ≤0.015 |
Velikost delca:
| velikost delcev | Občutljivost na dotik | Pretočnost | Porazdelitev velikosti delcev | ||
| D10 | D50 | D90 | |||
| 15-53μm | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Part's properties:
| Parts Density(g/cm³) | ≥8.4 |
| Printed(xy) | |
| Natezna trdnost (MPa) | ≥930 |
| Izkoristek (MPa) | ≥660 |
| Raztezek A10 (%) | ≥25 |
| Hardness HV/HRC | ≥260 HV5/15 |
Značilnosti prahu
● Visoka sferičnost in visoka pretočnost
● Nizka vsebnost kisika
paket
Za 3D-tiskanje: vsak PE paket + 20 kg pločevinke ali 25 kg/50 kg železni sod ali 250 kg železni sod.
