EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Inconel718 prah na osnovi niklja za 3D-tiskanje
In718 is a high-performance nickel-based superalloy that is widely used in the aerospace industry for its excellent strength, oxidation resistance, high-temperature corrosion resistance, and balanced performance-to-cost ratio.
It is particularly utilized in the manufacturing of critical components such as engine blades, turbine disks, and combustion chambers. With the advancement of 3D printing technology, In718 has become an important material in the additive manufacturing field, especially in technologies such as selective laser melting (SLM) and electron beam melting (EBM).
Opis
In718 is a high-performance nickel-based superalloy that is widely used in the aerospace industry for its excellent strength, oxidation resistance, high-temperature corrosion resistance, and balanced performance-to-cost ratio. It is particularly utilized in the manufacturing of critical components such as engine blades, turbine disks, and combustion chambers. With the advancement of 3D printing technology, In718 has become an important material in the additive manufacturing field, especially in technologies such as selective laser melting (SLM) and electron beam melting (EBM).
Splošne informacije
| Kraj rojstva: | Changsha, Kitajska |
| Znamka: | PRAH |
| Točka: | Inconel718 |
| Velikost delcev: | 15-53μm |
| certificiranje: | ISO9001, ISO14001 |
| Minimalno naročilo: | 20kg |
| Embalaža Podrobnosti: | Železni sod |
| Dobavni rok: | 7-10 dni |
Aplikacije
● Aerospace
● Energetska industrija
● avtomobilska industrija
● Medicinski pripomočki
● Industrijske in mehanske komponente
Tehnični podatki
GH4169 (Inconel718):
| Postavka | C | SI | Mn | Ni | Cr | Co | Mo | Al | Mg | Ti | Nb | P | S | Fe |
| GH¢4169 | ≤0.08 | ≤0.35 | ≤0.35 | 50.0-55.0 | 17.0-21.0 | ≤1.0 | 2.8-3.3 | 0.2-0.8 | ≤0.01 | ≤0.3 | 0.65-1.15 | ≤0.015 | ≤0.015 | Bal |
Velikost delca:
| velikost delcev | Občutljivost na dotik | Pretočnost | Porazdelitev velikosti delcev | ||
| D10 | D50 | D90 | |||
| 15-53μm | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Lastnosti dela:
| Gostota delov (g/cm³) | ≥8.18 |
| Natisnjeno (xy) | |
| Natezna trdnost (MPa) | ≥1050 |
| Izkoristek (MPa) | ≥750 |
| Raztezek A10 (%) | ≥22 |
| Trdota HV/HRC | ≥280 HV5/15 |
Značilnosti prahu
● Visoka sferičnost in visoka pretočnost
● Nizka vsebnost kisika
paket
Za 3D-tiskanje: vsak PE paket + 20 kg pločevinke ali 25 kg/50 kg železni sod ali 250 kg železni sod.
